61 lines
4.2 KiB
Markdown
61 lines
4.2 KiB
Markdown
|
# Wasm3 hardware support
|
||
|
|
||
|
## Recommended devices (ideal for beginners)
|
||
|
|
||
|
- ESP32-based
|
||
|
- **LilyGO TTGO T7 V1.4** │ [AliExpress](https://www.aliexpress.com/item/32977375539.html)
|
||
|
- **M5Stack Fire** │ [AliExpress](https://www.aliexpress.com/item/32847906756.html)
|
||
|
- nRF52840-based
|
||
|
- **Adafruit CLUE** │ [Adafruit](https://www.adafruit.com/clue)
|
||
|
- **Arduino Nano 33 BLE (or BLE Sense)** │ [Arduino](https://store.arduino.cc/arduino-nano-33-ble)
|
||
|
- **Particle Argon** │ [Particle](https://store.particle.io/collections/bluetooth/products/argon)
|
||
|
- **Adafruit Feather nRF52840** | [Adafruit](https://www.adafruit.com/product/4062)
|
||
|
- Other
|
||
|
- **Raspberry Pi Pico** | [Raspberry Pi](https://www.raspberrypi.org/products/raspberry-pi-pico)
|
||
|
- **Adafruit PyGamer/PyBadge/PyBadge LC** │ [Adafruit](https://www.adafruit.com/product/4242)
|
||
|
- **SparkFun Artemis** | [SparkFun](https://www.sparkfun.com/search/results?term=Artemis)
|
||
|
- **Teensy 4.0** │ [PJRC](https://www.pjrc.com/store/teensy40.html)
|
||
|
- **Wemos W600 PICO** │ [AliExpress](https://www.aliexpress.com/item/4000314757449.html)
|
||
|
|
||
|
## Compatibility table
|
||
|
|
||
|
Device | Chipset | Architecture | Clock | Flash | RAM
|
||
|
--- |:---: | --- | -----:| --- | ---
|
||
|
Espressif ESP32 | | Xtensa LX6 <sup>⚠️</sup> | 240MHz | 4 MB | 520KB
|
||
|
Particle Argon, Boron, Xenon | nRF52840 | Cortex-M4F | 64MHz | 1 MB | 256KB
|
||
|
Particle Photon, Electron | STM32F205 | Cortex-M3 | 120Mhz | 1 MB | 128KB
|
||
|
Sparkfun Photon RedBoard | STM32F205 | Cortex-M3 | 120Mhz | 1 MB | 128KB
|
||
|
Air602 | WM W600 | Cortex-M3 | 80MHz | 1 MB | 160KB+128KB
|
||
|
Adafruit PyBadge | ATSAMD51J19 | Cortex-M4F | 120MHz | 512KB | 192KB
|
||
|
Realtek RTL8711 | | Cortex-M3 | 166MHz | 2 MB | 2 MB+512KB
|
||
|
Nordic nRF52840 | | Cortex-M4F | 64MHz | 1 MB | 256KB
|
||
|
Nordic nRF52833 | | Cortex-M4F | 64MHz | 512KB | 128KB
|
||
|
P-Nucleo WB55RG | STM32WB55RG | Cortex-M4F | 64MHz | 1 MB | 256KB
|
||
|
Teensy 4.0 | NXP iMXRT1062 | Cortex-M7 | 600MHz | 2 MB | 1 MB
|
||
|
Teensy 3.5 | MK64FX512 | Cortex-M4F | 120MHz | 512KB | 192KB
|
||
|
MXChip AZ3166 | EMW3166 | Cortex-M4 | 100MHz | 1 MB+2 MB | 256KB
|
||
|
Arduino Due | AT91SAM3X8E | Cortex-M3 | 84MHz | 512KB | 96KB
|
||
|
Sipeed MAIX | Kendryte K210 | RV64IMAFDC | 400MHz | 16 MB | 8 MB
|
||
|
Fomu (soft CPU) | Lattice ICE40UP5K | RV32I | 12MHz | 2 MB | 128KB
|
||
|
|
||
|
## Limited support
|
||
|
|
||
|
The following devices can run Wasm3, however they cannot afford to allocate even a single Linear Memory page (64KB).
|
||
|
This means `memoryLimit` should be set to the actual amount of RAM available, and that in turn usually breaks the allocator of the hosted Wasm application (which still assumes the page is 64KB and performs OOB access).
|
||
|
|
||
|
Device | Chipset | Architecture | Clock | Flash | RAM
|
||
|
--- |:---: | --- | -----:| --- | ---
|
||
|
Espressif ESP8266 | | Xtensa L106 <sup>⚠️</sup> | 160MHz | 4 MB | ~50KB (available)
|
||
|
Teensy 3.1/3.2 | NXP MK20DX256 | Cortex-M4 | 72MHz | 288KB | 64KB
|
||
|
Blue Pill | STM32F103 | Cortex-M3 | 72MHz | 64KB | 20KB
|
||
|
Arduino MKR* | SAMD21 | Cortex-M0+ <sup>⚠️</sup> | 48MHz | 256KB | 32KB
|
||
|
Arduino 101 | Intel Curie | ARC32 | 32MHz | 196KB | 24KB
|
||
|
SiFive HiFive1 | Freedom E310 | RV32IMAC | 320MHz | 16 MB | 16KB
|
||
|
Nordic nRF52832 | | Cortex-M4F | 64MHz | 256/512KB | 32/64KB
|
||
|
Nordic nRF51822 | | Cortex-M0 <sup>⚠️</sup> | 16MHz | 128/256KB | 16/32KB
|
||
|
Wicked Device WildFire | ATmega1284 | 8-bit AVR <sup>⚠️</sup> | 20MHz | 128KB | 16KB
|
||
|
|
||
|
### Legend:
|
||
|
⚠️ This architecture/compiler currently fails to perform TCO (Tail Call Optimization/Elimination), which leads to sub-optimal interpreter behaviour (intense native stack usage, lower performance).
|
||
|
There are plans to improve this in future 🦄.
|