369 lines
10 KiB
C
369 lines
10 KiB
C
#include <usb.h>
|
|
#include <irq.h>
|
|
#include <generated/csr.h>
|
|
#include <string.h>
|
|
#include <usb.h>
|
|
|
|
#ifdef CSR_USB_EP_0_OUT_EV_PENDING_ADDR
|
|
|
|
static volatile uint8_t usb_rx_fifo[64];
|
|
static volatile uint8_t usb_rx_fifo_rd;
|
|
static volatile uint8_t usb_rx_fifo_wr;
|
|
|
|
static volatile int have_new_address;
|
|
static volatile uint8_t new_address;
|
|
|
|
// Firmware versions < 1.9 didn't have usb_address_write()
|
|
static inline void usb_set_address_wrapper(uint8_t address) {
|
|
if (version_major_read() < 1)
|
|
return;
|
|
if (version_minor_read() < 9)
|
|
return;
|
|
usb_address_write(address);
|
|
}
|
|
|
|
// Note that our PIDs are only bits 2 and 3 of the token,
|
|
// since all other bits are effectively redundant at this point.
|
|
enum USB_PID {
|
|
USB_PID_OUT = 0,
|
|
USB_PID_SOF = 1,
|
|
USB_PID_IN = 2,
|
|
USB_PID_SETUP = 3,
|
|
};
|
|
|
|
enum epfifo_response {
|
|
EPF_ACK = 0,
|
|
EPF_NAK = 1,
|
|
EPF_NONE = 2,
|
|
EPF_STALL = 3,
|
|
};
|
|
|
|
#define USB_EV_ERROR 1
|
|
#define USB_EV_PACKET 2
|
|
|
|
void usb_disconnect(void) {
|
|
usb_ep_0_out_ev_enable_write(0);
|
|
usb_ep_0_in_ev_enable_write(0);
|
|
irq_setmask(irq_getmask() & ~(1 << USB_INTERRUPT));
|
|
usb_pullup_out_write(0);
|
|
usb_set_address_wrapper(0);
|
|
}
|
|
|
|
void usb_connect(void) {
|
|
|
|
usb_set_address_wrapper(0);
|
|
usb_ep_0_out_ev_pending_write(usb_ep_0_out_ev_enable_read());
|
|
usb_ep_0_in_ev_pending_write(usb_ep_0_in_ev_pending_read());
|
|
usb_ep_0_out_ev_enable_write(USB_EV_PACKET | USB_EV_ERROR);
|
|
usb_ep_0_in_ev_enable_write(USB_EV_PACKET | USB_EV_ERROR);
|
|
|
|
usb_ep_1_in_ev_pending_write(usb_ep_1_in_ev_enable_read());
|
|
usb_ep_1_in_ev_enable_write(USB_EV_PACKET | USB_EV_ERROR);
|
|
|
|
usb_ep_2_out_ev_pending_write(usb_ep_2_out_ev_enable_read());
|
|
usb_ep_2_in_ev_pending_write(usb_ep_2_in_ev_pending_read());
|
|
usb_ep_2_out_ev_enable_write(USB_EV_PACKET | USB_EV_ERROR);
|
|
usb_ep_2_in_ev_enable_write(USB_EV_PACKET | USB_EV_ERROR);
|
|
|
|
// Accept incoming data by default.
|
|
usb_ep_0_out_respond_write(EPF_ACK);
|
|
usb_ep_2_out_respond_write(EPF_ACK);
|
|
|
|
// Reject outgoing data, since we have none to give yet.
|
|
usb_ep_0_in_respond_write(EPF_NAK);
|
|
usb_ep_1_in_respond_write(EPF_NAK);
|
|
usb_ep_2_in_respond_write(EPF_NAK);
|
|
|
|
usb_pullup_out_write(1);
|
|
|
|
irq_setmask(irq_getmask() | (1 << USB_INTERRUPT));
|
|
}
|
|
|
|
void usb_init(void) {
|
|
usb_pullup_out_write(0);
|
|
return;
|
|
}
|
|
|
|
#define EP0OUT_BUFFERS 4
|
|
__attribute__((aligned(4)))
|
|
static uint8_t volatile usb_ep0out_buffer[EP0OUT_BUFFERS][256];
|
|
static uint8_t volatile usb_ep0out_buffer_len[EP0OUT_BUFFERS];
|
|
static uint8_t volatile usb_ep0out_last_tok[EP0OUT_BUFFERS];
|
|
static volatile uint8_t usb_ep0out_wr_ptr;
|
|
static volatile uint8_t usb_ep0out_rd_ptr;
|
|
static const int max_byte_length = 64;
|
|
|
|
static const uint8_t * volatile current_data;
|
|
static volatile int current_length;
|
|
static volatile int data_offset;
|
|
static volatile int data_to_send;
|
|
static int next_packet_is_empty;
|
|
static volatile uint8_t ep2_fifo_bytes;
|
|
|
|
__attribute__((section(".ramtext")))
|
|
static void process_tx(void) {
|
|
|
|
// Don't allow requeueing -- only queue more data if we're
|
|
// currently set up to respond NAK.
|
|
if (usb_ep_0_in_respond_read() != EPF_NAK) {
|
|
return;
|
|
}
|
|
|
|
// Prevent us from double-filling the buffer.
|
|
if (!usb_ep_0_in_ibuf_empty_read()) {
|
|
return;
|
|
}
|
|
|
|
if (!current_data || !current_length) {
|
|
return;
|
|
}
|
|
|
|
data_offset += data_to_send;
|
|
|
|
data_to_send = current_length - data_offset;
|
|
|
|
// Clamp the data to the maximum packet length
|
|
if (data_to_send > max_byte_length) {
|
|
data_to_send = max_byte_length;
|
|
next_packet_is_empty = 0;
|
|
}
|
|
else if (data_to_send == max_byte_length) {
|
|
next_packet_is_empty = 1;
|
|
}
|
|
else if (next_packet_is_empty) {
|
|
next_packet_is_empty = 0;
|
|
data_to_send = 0;
|
|
}
|
|
else if (current_data == NULL || data_to_send <= 0) {
|
|
next_packet_is_empty = 0;
|
|
current_data = NULL;
|
|
current_length = 0;
|
|
data_offset = 0;
|
|
data_to_send = 0;
|
|
return;
|
|
}
|
|
|
|
int this_offset;
|
|
for (this_offset = data_offset; this_offset < (data_offset + data_to_send); this_offset++) {
|
|
usb_ep_0_in_ibuf_head_write(current_data[this_offset]);
|
|
}
|
|
usb_ep_0_in_respond_write(EPF_ACK);
|
|
return;
|
|
}
|
|
|
|
int usb_send(const void *data, int total_count) {
|
|
|
|
while ((current_length || current_data))// && usb_ep_0_in_respond_read() != EPF_NAK)
|
|
;
|
|
current_data = (uint8_t *)data;
|
|
current_length = total_count;
|
|
data_offset = 0;
|
|
data_to_send = 0;
|
|
process_tx();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int usb_wait_for_send_done(void) {
|
|
while (current_data && current_length)
|
|
usb_poll();
|
|
while ((usb_ep_0_in_dtb_read() & 1) == 1)
|
|
usb_poll();
|
|
return 0;
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
void usb_isr(void) {
|
|
uint8_t ep_pending;
|
|
|
|
ep_pending = usb_ep_0_out_ev_pending_read();
|
|
|
|
// We got an OUT or a SETUP packet. Copy it to usb_ep0out_buffer
|
|
// and clear the "pending" bit.
|
|
if (ep_pending) {
|
|
uint8_t last_tok = usb_ep_0_out_last_tok_read();
|
|
|
|
int byte_count = 0;
|
|
usb_ep0out_last_tok[usb_ep0out_wr_ptr] = last_tok;
|
|
volatile uint8_t * obuf = usb_ep0out_buffer[usb_ep0out_wr_ptr];
|
|
while (!usb_ep_0_out_obuf_empty_read()) {
|
|
obuf[byte_count++] = usb_ep_0_out_obuf_head_read();
|
|
usb_ep_0_out_obuf_head_write(0);
|
|
}
|
|
|
|
if (last_tok == USB_PID_SETUP) {
|
|
usb_ep_0_in_dtb_write(1);
|
|
data_offset = 0;
|
|
current_length = 0;
|
|
current_data = NULL;
|
|
const struct usb_setup_request *request = (const struct usb_setup_request *)obuf;
|
|
usb_setup(request);
|
|
}
|
|
else {
|
|
usb_ep0out_buffer_len[usb_ep0out_wr_ptr] = byte_count - 2 /* Strip off CRC16 */;
|
|
usb_ep0out_wr_ptr = (usb_ep0out_wr_ptr + 1) & (EP0OUT_BUFFERS-1);
|
|
}
|
|
usb_ep_0_out_ev_pending_write(ep_pending);
|
|
usb_ep_0_out_respond_write(EPF_ACK);
|
|
}
|
|
|
|
ep_pending = usb_ep_0_in_ev_pending_read();
|
|
// We just got an "IN" token. Send data if we have it.
|
|
if (ep_pending) {
|
|
usb_ep_0_in_respond_write(EPF_NAK);
|
|
usb_ep_0_in_ev_pending_write(ep_pending);
|
|
if (have_new_address) {
|
|
have_new_address = 0;
|
|
usb_set_address_wrapper(new_address);
|
|
}
|
|
process_tx();
|
|
}
|
|
|
|
ep_pending = usb_ep_1_in_ev_pending_read();
|
|
if (ep_pending) {
|
|
usb_ep_1_in_respond_write(EPF_NAK);
|
|
usb_ep_1_in_ev_pending_write(ep_pending);
|
|
}
|
|
|
|
ep_pending = usb_ep_2_in_ev_pending_read();
|
|
if (ep_pending) {
|
|
usb_ep_2_in_respond_write(EPF_NAK);
|
|
usb_ep_2_in_ev_pending_write(ep_pending);
|
|
ep2_fifo_bytes = 0;
|
|
}
|
|
|
|
ep_pending = usb_ep_2_out_ev_pending_read();
|
|
if (ep_pending) {
|
|
while (!usb_ep_2_out_obuf_empty_read()) {
|
|
usb_rx_fifo[(usb_rx_fifo_wr++) & 0x3f] = usb_ep_2_out_obuf_head_read();
|
|
usb_ep_2_out_obuf_head_write(0);
|
|
}
|
|
// Strip off the CRC16.
|
|
usb_rx_fifo_wr -= 2;
|
|
|
|
usb_ep_2_out_ev_pending_write(ep_pending);
|
|
usb_ep_2_out_respond_write(EPF_NAK);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
int usb_getc(void) {
|
|
if (usb_rx_fifo_rd == usb_rx_fifo_wr) {
|
|
usb_ep_2_out_respond_write(EPF_ACK);
|
|
return -1;
|
|
}
|
|
return usb_rx_fifo[(usb_rx_fifo_rd++) & 0x3f];
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
void usb_putc(char c) {
|
|
usb_ep_2_in_ibuf_head_write(c);
|
|
ep2_fifo_bytes++;
|
|
usb_ep_2_in_respond_write(EPF_ACK);
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
int usb_write(const char *buf, int count) {
|
|
int to_write = 64;
|
|
int i;
|
|
if (to_write > count)
|
|
to_write = count;
|
|
for (i = 0; i < to_write; i++)
|
|
usb_ep_2_in_ibuf_head_write(buf[i]);
|
|
ep2_fifo_bytes += to_write;
|
|
usb_ep_2_in_respond_write(EPF_ACK);
|
|
|
|
return to_write;
|
|
}
|
|
|
|
extern volatile uint8_t terminal_is_connected;
|
|
|
|
__attribute__((section(".ramtext")))
|
|
int usb_can_getc(void) {
|
|
if (usb_rx_fifo_rd == usb_rx_fifo_wr) {
|
|
usb_ep_2_out_respond_write(EPF_ACK);
|
|
return 0;
|
|
}
|
|
return terminal_is_connected;
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
int usb_can_putc(void) {
|
|
return terminal_is_connected && usb_ep_2_in_ibuf_empty_read() && (usb_ep_2_in_respond_read() == EPF_NAK);// (ep2_fifo_bytes <= 60);
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
void usb_ack_in(void) {
|
|
// usb_ep_0_in_dtb_write(1);
|
|
while (usb_ep_0_in_respond_read() == EPF_ACK)
|
|
;
|
|
usb_ep_0_in_respond_write(EPF_ACK);
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
void usb_ack_out(void) {
|
|
// usb_ep_0_out_dtb_write(1);
|
|
while (usb_ep_0_out_respond_read() == EPF_ACK)
|
|
;
|
|
usb_ep_0_out_respond_write(EPF_ACK);
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
void usb_err_in(void) {
|
|
usb_ep_0_in_respond_write(EPF_STALL);
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
void usb_err_out(void) {
|
|
usb_ep_0_out_respond_write(EPF_STALL);
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
int usb_recv(void *buffer, unsigned int buffer_len) {
|
|
|
|
// Set the OUT response to ACK, since we are in a position to receive data now.
|
|
usb_ep_0_out_respond_write(EPF_ACK);
|
|
while (1) {
|
|
if (usb_ep0out_rd_ptr != usb_ep0out_wr_ptr) {
|
|
if (usb_ep0out_last_tok[usb_ep0out_rd_ptr] == USB_PID_OUT) {
|
|
unsigned int ep0_buffer_len = usb_ep0out_buffer_len[usb_ep0out_rd_ptr];
|
|
if (ep0_buffer_len < buffer_len)
|
|
buffer_len = ep0_buffer_len;
|
|
usb_ep0out_buffer_len[usb_ep0out_rd_ptr] = 0;
|
|
memcpy(buffer, (void *)&usb_ep0out_buffer[usb_ep0out_rd_ptr], buffer_len);
|
|
usb_ep0out_rd_ptr = (usb_ep0out_rd_ptr + 1) & (EP0OUT_BUFFERS-1);
|
|
return buffer_len;
|
|
}
|
|
usb_ep0out_rd_ptr = (usb_ep0out_rd_ptr + 1) & (EP0OUT_BUFFERS-1);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void usb_set_address(uint8_t new_address_) {
|
|
new_address = new_address_;
|
|
have_new_address = 1;
|
|
}
|
|
|
|
__attribute__((section(".ramtext")))
|
|
void usb_poll(void) {
|
|
// If some data was received, then process it.
|
|
while (usb_ep0out_rd_ptr != usb_ep0out_wr_ptr) {
|
|
const struct usb_setup_request *request = (const struct usb_setup_request *)(usb_ep0out_buffer[usb_ep0out_rd_ptr]);
|
|
// unsigned int len = usb_ep0out_buffer_len[usb_ep0out_rd_ptr];
|
|
uint8_t last_tok = usb_ep0out_last_tok[usb_ep0out_rd_ptr];
|
|
|
|
usb_ep0out_buffer_len[usb_ep0out_rd_ptr] = 0;
|
|
usb_ep0out_rd_ptr = (usb_ep0out_rd_ptr + 1) & (EP0OUT_BUFFERS-1);
|
|
|
|
if (last_tok == USB_PID_SETUP) {
|
|
usb_setup(request);
|
|
}
|
|
}
|
|
|
|
process_tx();
|
|
}
|
|
|
|
#endif /* CSR_USB_EP_0_OUT_EV_PENDING_ADDR */ |